EGPC-B201-W3 Product Features
M.2 2260 to Dual Isolated CANbus J1939 Module
CANbus 2.0B backward compatible with 2.0A
Supports baud rate 100/125/250/500(default)/800/1000K
Supports CAN message acceptance filter
Keeps configuration after hardware reboot
Up to 6000 CAN messages per second (receive data)
Supports Listen-only mode
Additional driver to support Linux SocketCAN
Supports SAE J1939 high layer protocol
Termination resistor enabled/disabled by jumper
Complies with EN61000-4-5 2.5kV surge protection
Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
30µ” golden finger
Supports -40 to +85 degrees
Industrial design
Form Factor M.2 2260
Function CANbus
Input I/F PCI Express 2.0 x 1
Output I/F CANbus 2.0B
Output connector 2 x DB-9
Power Consumption 2.69W (3.3V, 815mA)
Dimensions (W x L x H/mm) 22 x 60/80 x 8.05
Temperature STD temp: 0°~70°C
Wide temp: -40°~85°C
Environment Vibration: 5G @7~2000Hz
Shock: 50G @ 0.5ms
Notes Download driver and API (the same as EMUC-B202) from MyInnodisk website.
Windows: XP (32bit), 7 (32/64bit), 8/8.1 (32/64bit), 10 (32/64bit)
Linux: Kernel 2.6 and above (Native CDC-ACM driver),
Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit